干雾降温加湿喷嘴选型指南,手把手教您选喷嘴
一款喷嘴既要满足加湿的要求,还要是干雾,总体要求达到降温的效果,那么要符合这样的要求,喷嘴的设计一定有别于普通的雾化喷嘴。对,这就是干雾加湿喷嘴的设计独特之处,
干雾加湿喷嘴的顶端设计有针尖,用来将喷嘴孔出来的液滴进一步雾化,液滴碰撞雾化
效果更好。此款喷嘴采用超声波雾化原理,雾化效果比普通的雾化喷嘴更好。喷嘴本体有气液入口,气液在喷嘴内部碰撞混合,经由出水孔到针尖击打成更好的雾化效果。
喷嘴由不锈钢材质制造而成,能够耐磨耐腐蚀,且喷嘴的使用压力为常压,不锈钢雾化喷嘴,这就对泵的要求放低很多,客户使用此喷嘴不需要单独的去购买泵,节约使用成本。
以下是喷嘴的参数对照表:
Dry fog cooling humidifying nozzle selection guide, hold you selected nozzle
A nozzle should not only meet the requirements of humidification, also is dry fog, general requirements to achieve the effect of cooling,雾化喷嘴, then must conform to this requirement, the design of the nozzle must be different from the ordinary atomization nozzle.Yes, this dry fog humidifying nozzle design unique,
Dry fog humidification on top of the nozzle tip is designed, used to make the nozzle hole out further atomized droplets, atomized droplets collision
The effect is better.This nozzle on the principle of ultrasonic atomization, atomization effect is better than ordinary atomization nozzle.Faintly nozzle body fluid inlet, mixed gas and liquid inside the nozzle through the drainage holes to pinpoint struck into better atomization effect.
Nozzle made from stainless steel material, can wear to corrosion, and the nozzle used for atmospheric pressure, it is put to the requirement of pump is much lower, customers to use the nozzle does not need to separate to buy pump, saving the cost.
Here are the parameters of the nozzle table: